Cutter & Buck Mens Shoreline Color Block 1/4 Zip () - SKU: MCK09423
Choose Your Color
Cutter & Buck Mens Shoreline Color Block 1/4 Zip
Stylish color-blocking and brushed melange stripe fabric with just enough stretch for freedom of movement. Made from 92% polyester and 8% spandex, CB DryTec fleece. Featuring open bottom, 50+ UPF and moisture wicking. C&B logo at back half moon.
Size & Fit
This Product Is Semi-Fitted
- Contours the body
- Tighter than a classic fit, looser than a slim fit
- Sits close to the body without a tight squeeze
- Shaped to the body but not closely fitted
|Chest Size (in.)||Sleeve Length (in.)||Neck (in.)|
|Chest||Body Length (Back)||Sleeve|
How To Choose Your Size
We understand that choosing the best size and fit can sometimes be challenging. We're here to help!
Just follow the simple steps below to select the best size for your needs.
Step 1 - Size Information
A size chart generally refers to the "size" you might want based on your actual body measurements. You should use this as a general guideline because you might want a tighter or looser fit. When in doubt or you fall in between sizes we suggest ordering a size up. If you are unsure of your measurements, click here to review tips to help you take them properly.
Step 2 - Fit Information
This product is "Semi-Fitted" shaped to the body but not closely fitted. It contours to the body and will fit tighter than a classic fit but looser than a slim fit. It sits close to the body without a tight squeeze.
Step 3 - Garment Measurements
Using garment dimensions provided by the manufacturer is the best way to determine how an item will fit you. You should take into consideration your preferences and what you are wearing it for when choosing which size to order.
The garment dimensions listed above are the actual size of the garment laid out flat.
Measurement Notes: Chest is measured 1" below the armhole with garment laying flat. Sleeve from center of the neck to the cuff.
Compare your actual body measurements to the garment measurements (you'll need to double the circumference measurement listed in the garment measurements) and allow room for movement. Manufacturers allow for a tolerance of + or - 1 inch. When in doubt or if you fall in between sizes, we suggest ordering a size up.
If you have a garment and like the way it fits, you can measure it based on these steps then determine what the best size to order will be.